Company Details

  • Shijiazhuang Bang dong Pipeline Technology Co,Ltd.

  •  [Hebei,China]
  • Business Type:Manufacturer
  • Main Markets: Africa , Asia , East Europe , Europe , Middle East , North Europe , West Europe
  • Exporter:91% - 100%
  • Certs:CE, ISO9001
  • Description:Alloy Steel 90 Degree Elbow,Stainless Steel 904L Forged Tee,Stainless Steel LR Elbow
Inquiry Basket ( 0 )

Shijiazhuang Bang dong Pipeline Technology Co,Ltd.

Alloy Steel 90 Degree Elbow,Stainless Steel 904L Forged Tee,Stainless Steel LR Elbow

Home > Products > Forged Steel Pipe Fitting > Thread Pipe Fitting > ASME B16.11 Socket Weld 3D Elbow

ASME B16.11 Socket Weld 3D Elbow

Share to:  
    Unit Price: USD 2.5 / Piece/Pieces
    Payment Type: L/C,T/T
    Incoterm: FOB,CFR,CIF
    Min. Order: 20 Piece/Pieces

Basic Info

Model No.3D Elbow

BrandBangdong

ConnectionWelding

ShapeEqual

Head CodeRound

Angle30 Degree

Wall ThicknessStd

MaterialStainless Steel

TechnicsForged

CertificationApi

ColorBlack

Additional Info

PackagingWooden Cases or as per buyer's requirements

Productivity1000pcs/month

TransportationOcean,Land,Air,Train/TNT/DHL

Place of OriginCangzhou,China

Supply Ability1000pcs/month

CertificateISO/CE/API

HS Code73079900

PortZhengzhou Train Station,Beijing Air Port,Wuhan Train Station

Payment TypeL/C,T/T

IncotermFOB,CFR,CIF

Product Description

ASME B16.11 Socket Weld 3D Elbow


Bangdong Supply Alloy Steel 90 Degree Elbow,Stainless Steel 904L Forged Tee,Stainless Steel LR Elbow.We specializes as manufacturers of standard range of Steel Flanges as per the national and international standards. We can also manufacture as per the customer's requirement.elbow include:   Dn1350 F91 Forged Pipe    ,Aw 6060 T66 Aluminum Elbow,  En755 Aluminum Elbow,   A420 Wpl6 Dn700 Elbow     , 28 Inch Wpl6 Elbow,    38in Wp91 Lr Elbow, Dn950 Seamless Elbow  Alloy Steel Seamless A234Wp9 Elbow,Stainless Steel Forging Socket Weld Elbow,A860wphy42 52 60 65 70 Elbow

Carbon Steel 90lr Reducing Elbow,A403 304/304l 316/316l Elbow,Butt Weld A403 304/304L Elbow

 amd etc. We manufacture all type of Slip-on  We also manufacture the Flanges as per customers requirements. Slip-on flanges, are also available in most pressure ratings and sizes, and are a popular type due to their ease of application. This flange slips over the end of the pipe and is usually set so that the flange face is about .375" (9.5 mm) beyond the end of the pipe. 


Components are used with support posts that are "in-line" with horizontal members well suited for use in conventional railings and other pipe structures. For railings and racks that require heavier duty strength, choose the offset design fittings that permit pipe to cross with an absolute minimum of cutting, since the support members are not "in-line." 

The features of slip on flanges are as follows :
¤ Precision cast for use with steel, stainless or aluminum pipe 
¤ Required for easy installation: Tape measure, pipe cutter and hex wrench 
¤ Lightweight easy handling · Highly attractive 
¤ Low labor costs and low maintenance 
¤ Corrosion resistant and long life 
¤ High strength Installation If you have a tape measure, pipe cutter, and a hex wrench, you have all you need to assemble Slip-on Flanges, Plugs, and Couplings. Select the proper fittings for your needs, cut the pipe to length and slip on the fitting and tighten the set screws with a hex wrench. 


Lap Joint flanges are used on piping equipped with lap joint stub ends or with lapped pipe. They may be used at all pressures and are available in a full size range. 

These flanges slip over the pipe, and are not welded or otherwise fastened to it, bolting pressure is transmitted to the Gasket by the pressure of the flange against the back of the pipe lap. 

Lap Joint flanges have certain special advantages
¤ Freedom to swivel around the pipe facilitates the lining up of opposing flange bolt holes; 
¤ Lack of contact with the fluid in the pipe often permits the use of inexpensive carbon steel flanges with corrosion resistant pipe or tubing
¤ In systems which erode or corrode quickly, the flanges may be salvaged for re-use.

Blind flanges, available in all sizes and pressure ratings, are solid forgings used to close off the end of a piping system and to gain easy access to the interior of the line. Unless otherwise specified, Class 150 (PN 20) and Class 300 (PN 50) flanges in all types except lap joint flanges are furnished with a .06" (1.6 mm) raised face (which is included in the flange thickness dimension). Heavier pressure ratings are machined with a .25" (6.4 mm) raised face, in addition to the designated flange thickness. Lap Joint flanges are machined with a flat face and a fillet radius to

 accommodate the stub end or pipe lap.

Din2605 Aw 6060 T66 Aluminum Elbow

Asme B16.9 Aluminum Elbow

Dn 600large Diameter Elbow

Din 2605-1 P265gh Lr Elbow

1/2" P235gh Lr Elbow

89 X 6mm En Aw6060 Elbow

108 X 4 Lr En755 Aw6060 Elbow




ASME B16.11 Socket Weld 3D Elbow

Product Categories : Forged Steel Pipe Fitting > Thread Pipe Fitting

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
luffy Ms. luffy
What can I do for you?
Contact Supplier