Company Details
Shijiazhuang Bang dong Pipeline Technology Co,Ltd.
December 11, 2018
Full-Encirclement Reinforcing Saddles are used to provide reinforcement for branch outlets in accordance with ASME B31.3, B31.4, B31.8 and other applicable design codes. Although Full-Encirclement Reinforcing Saddles are designed to fully encircle the run pipe, they are not designed to be pressure retaining. In order to avoid gas entrapment during welding and to prevent pressure containment, should a leak develop underneath the saddle, Full-Encirclement Reinforcing Saddles are provided with a vent hole.
We can supply Full-Encirclement Reinforcing Saddles with full size or reduced branch outlets. We stocks Full-Encirclement Saddles in a variety of sizes and configurations manufactured using A234 Grade WPB material. We also have the in-house capability to supply stainless or high-yield stress saddles in any size or configuration required.
We can supply Full-Encirclement Reinforcing Saddles in any of the five configurations commonly used in the industry:
Part 1 - Single piece construction, split into two equal halves through the run and the branch
Part 2 - Single piece construction, split longitudinally through the run perpendicular to the branch
Part 3 - Two piece construction, composed of a run cylinder welded to a partial saddle, split into two equal halves through the run and the branch
Part 4 - Two piece construction, composed of a run cylinder welded to a partial saddle, split longitudinally through the run perpendicular to the branch
Part 5 - Single piece construction, cut into three sections by splitting through the branch and through the run perpendicular to the branch
The above is the FULL-ENCIRCLEMENT REINFORCING SADDLES we have listed for you. You can submit the following form to obtain more industry information we provide for you.
You can visit our website or contact us, and we will provide the latest consultation and solutions
Send Inquiry
Most Popular
lastest New
Send Inquiry