304/316 Graphite Spiral Wound Gaskets

304/316 Graphite Spiral Wound Gasket

Spiral wound gaskets are to be constructed as alternate plies of preformed metal windings and plain fillers that are spirally wound when compressed between two flanges. A "v" and "w" shaped crown centered in the metal strip acts as a spring, giving gaskets greater resilience under varying conditions. Filler and strip materials can be changed to accommodate different chemical compatibility requirements. If the load available to compress a Gasket is limited, gasket construction and dimensions can be altered to provide an effective seal.
A spiral wound gasket may include a centering ring, an inner ring or both. The outer centering ring enters the gasket within the flange and acts as a compression limiter, while the inner ring provides additional radial strength. The inner ring also reduces flange erosion and protects the sealing element. Resilience and strength make spiral wound gaskets an ideal choice under a variety of conditions and applications. Widely used in refineries and chemical processing plants, spiral wound gasket are also effective for power generation, aerospace, and a variety of valve and special applications. The spiral wound gasket industry is looking for change in the specification covering spiral wound gasket. As environmental regulations and industry requirements become increasingly stringent, new and custom applications are continuing to evolve. Wherever you need a strong, resilient seal, our spiral wound gaskets provide an effective solution.

Technical Data

Ring Joint Type Gaskets

PTFE Gasket

Spiral Wound Gasket16/316l Pipe Fitting

Large Diameter Steel Pipe Fitting

Product Categories : Bolts & Nuts > Gasket