High pressure 90 degree elbow

High pressure 90 degree elbow

Bangdong Supply Low pressure 90 degree elbow,Small size 90 degree elbow,Large size 90 degree elbow.We carry a stock range of petrochemical grade bolting including allthread, studbolts, hexagon & heavy hexagon nuts, heavy hexagon head bolts & blanks, socket head capscrews & 12 point flange head screws.All of the standard petrochemical grades of bolting are available to us including B5/gr3, B6/ gr6, B7/2H, B7M/2HM, L7/gr7, L7M/7M, B16/gr4, B8/gr8, B8M/8M, B8T/8T, B8C/8C, UNS S31803 (F51) UNS S32760 (F55) however, we can produce almost any fastener product in virtually and material grade required.

Pipeline products including pipe, tube, butt weld fittings, forged fittings, flanges, valves, gaskets can also be supplied in a variety of materials.

We have the ability to source and supply a complete range of pipeline components in a spectrum of materials including carbon & alloy steels, stainless steels, duplex & super duplex stainless steels, titanium and non-ferrous metals & high nickel alloys.

Carbon Steel, Cr-Mo & Low Temp Alloy Steels

Astm A234 WPB, WP5, WP9, WP11, WP22, WP91 / A420 WPL3, WPL6 / WPHY 52 – 65

ASTM A105n / A350 LF2, LF3 / A694 F52, F65 / A182 F5, F9, F11, F22, F91

API 5L gr B, X52, X60, X65 / ASTM A53 / A106 grA, grB / A333 gr3, gr6 / A335 gr P5, P9, P11, P22, P91

Stainless Steels WP 304L / 304H / 316L / 316H / 321 / 321H / 347 / 347H / 31254 / 31803 / 32750 / 32760 

A182 gr F304(L) / F316(L/H/Ti) / F321(H) / F347(H) / F44 / F51 / F53 / F55.

TP304L / 304H / 316L / 316H / 316Ti / 321 / 321H / 347 / 347H / 31254 (6Mo) / 31803 / 32750 / 32760.

ButtWeld Pipe Fittings are used in connecting and creating pipe-work systems where they are welded into the system using circumferential butt welds. These pipe fittings are used in conjunction with ANSI pipe and flanges which can be supplied in the corresponding size ranges. Pipe Fittings are manufactured to dimensions and tolerances in accordance with ANSI B16.9 , ANSI B16.28, and MSS SP43.

Long radius and Short radius Elbows , these enable the piping run to move through either 45, 90, and 180 degree angle.
Equal and Reducing Tees allows connection of a branch at right angles from the main pipe run size.
Concentric Reducers are used to connect two different size pipes together whilst maintaining good flow characteristics.
Eccentric Reducers are also used to connect two different pipe sizes together but with one straight side to enable pipe run 
to be placed against a wall.
End Caps are used to blank off the end of a pipe run.

Butt Weld Pipe Fittings are available to ASTM A234Wpb and ASTM A403 for Stainless Steels other standards are also available.
Our pipe fittings are usually supplied in accordance with one of the following classes.
WP-B : These pipe fittings are manufactured from Seamless Pipe starting material which is pulled or pressed to achieve the desired finished fitting.
WP-W : These pipe fittings are manufactured either from Welded Pipe starting material or plate material which is pressed 
in to shape and then welded.
WP-WX : These pipe fittings are manufactured either from Welded pipe starting material or plate material which is pressed in to shape and then welded. But then all welds are subject to a 100% radiograph in accordance with ASME section VIII, or other supplied standards.

Product Categories : Large Diameter Steel Pipe Fitting > A860 WPHY52 Pipe Fitting